B01

Mapei

Founded in 1937, Mapei is the world-leading manufacturer of adhesives and chemical building products - and a specialist in the production of adhesives and preparation products for the installation of wall and floor coverings. Its extensive product range includes products for the preparation of all types of substrates used in construction: Surface membranes, levelling compounds, primers, waterproofing, ready mixed mortars, special products for the repair of concrete, admixtures for mortar and concrete.

Contact Details

Cheyenne Spears +44 121 508 6970 Visit Website

Innovation Documents

  • Mapeshield E25 (437.94 KiB)

    Self-adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of reinforcement rods in concrete

Documents

  • MAPEFLEX PU 45 FT (332.29 KiB)

    Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%.

  • Mapefer 1K (465.35 KiB)

    One-component corrosion-inhibiting cement mortar for the protection of reinforcing rods

  • Planitop Smooth & Repair R4 (723.74 KiB)

    Structural R4-class, rapidsetting, shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete

  • MapeWrap C UNI-AX (426.01 KiB)

    High strengh uni-directional carbon fibre fabric with high modulus of elasticity

  • Mapeshield E 25 (498.93 KiB)

    Self-adhesive zinc plate applied directly on the surface of structures for galvanic cathodic protection against the corrosion of reinforcement rods in concrete

  • Planitop Smooth & Repair R2 (552.74 KiB)

    R2-class, rapid-setting shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete

Products at the Show

Mapeshield E 25

Self-adhesive zinc plate applied directly on the surface of structures for galvanic cathodic protection against the corrosion of reinforcement rods in concrete

Mapefer 1K

One-component corrosion-inhibiting cement mortar for the protection of reinforcing rods

Planitop Smooth & Repair R4

Structural R4-class, rapidsetting, shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete

Videos

Mapei UK unveils new product for the construction industry: MAPEMORTAR HB R3

Mapei UK has launched a new product for use in the professional construction industry, Mapemortar HB R3. Produced at Mapei’s West Midlands manufacturing centre, Mapemortar HB R3 is a medium strength (R3), high build repair mortar, which is suitable for use on overhead and vertical repairs including balconies, culverts and tunnel linings.

Repairing a road viaduct.

This video illustrates a series of systems offered by Mapei to carry out long-lasting repair work on road viaducts. The work phases described cover the following areas in particular:

-WATERPROOFING the FOUNDATION PLINTH of a PILE with bitumen emulsion and then protecting the plinth with a polyethylene membrane;

-REPAIR WORK on a PILE by applying galvanic cathodic protection for the steel reinforcement, reintegrating deteriorated areas of the pile with fibre-reinforced, sulphate-resistant thixotropic mortar and then protecting the pile with an elastic cementitious membrane;

-REPAIR WORK on a SUPPORT BLOCK using high strength epoxy mortar;

-REPAIR WORK on a JOINT by reconstructing the support bed with screed-consistency, high strength epoxy mortar before inserting a new reinforced rubber joint and fastening the joint in position with fluid epoxy resin containing special fillers;

-REPAIR WORK on a KERB using mortar reinforced with polymer fibres with work-hardening properties;

-WATERPROOFING the viaduct DECK with a hybrid polyurea-based waterproofing system.